Your Market
We can review the conformity of your product and the required certificates needed for European, US & Worldwide Markets
Your Certificates
We certify the compliance of your products built-in interfaces, including Bluetooth, Wi-Fi, LTE, CAN, LIN, Automotive Ethernet, and many more
Your Costs
We can negotiate the best deals for you with our certification partners and will always offer you a competitive quotation
Your Measurements
We schedule Your measurements in accordance with your prototyping plan, manage your releases and complete your certification as SOP
Our Certification Workflow
Our certification test experts are on hand to support you throughout this process and are available to answer your questions
Defining Your Product Conformity Requirements
Do You want to certificate Your product in a German Market, or in any other European Market or even for the Worldwide Market?
We can review the conformity of your products built-in interfaces (Bluetooth, Wi-Fi, LTE, CAN, LIN, Automotive Ethernet, etc.)
We Undertake All Required Tests and Documentation
We generate all the necessary certification evidence for Your Product including User Manuals, Datasheets, Declarations of Conformance (DoC), etc. and we package everything into a complete certification specification.
We prepare all the tests required by your market specific standards including tests for Electromagnetic Compatibility EMC, Wireless, RF module tests, CE Mark, FCC, EMC Directive 2014/30/EU, Radio Equipment Directive 2014/53/EU (RED), Low Voltage Directive 2014/35/EU and Safety standards.
Third-Party Costs
The completion of the complete certification specification enables us to provide a cost estimate for all certification activities.
Our experience means that costs are considered in the production of the certification specification to provide a value for money solution. In particular, for third-party costs incurred through the use of certification houses.
We take into consideration if your product should be certified for any particular markets such as Europe or any other Markets.
Total Package Calculations
With all third-party cost obtained, we can calculate the total package costs for your product: technology + costs + time estimation.
At the completion of the estimation process, we deliver to you a detailed quotation with fully transparent costs estimations.
Your Approval
Our aim is to get your full agreement, support, and understanding of the estimate. We are happy to discuss the estimated effort and the estimated costs of our quotation with you before seeking your approval.
We always endeavor to find a common working basis. Your opinion is always important to us and guides our business strategy. we want to develop an honest working relationship with our customers based upon trust, we need to make a reasonable profit on the projects we undertake to stay in business but we don’t want you to feel we are aver abusing our relationship.
Confidentiality Guaranteed
We guarantee the confidentiality of your product data at all times during the project lifecycle and after it has completed.
Together is Better
We look forward to working with you to successfully deliver your product according to our motto:
- Coming Together is a beginning
- Keeping together is Progress
- Working together is Success
Defining Your Product Conformity Requirements
Do You want to certificate Your product in a German Market, or in any other European Market or even for the Worldwide Market?
We can review the conformity of your products built-in interfaces (Bluetooth, Wi-Fi, LTE, CAN, LIN, Automotive Ethernet, etc.)
We Undertake All Required Tests and Documentation
We generate all the necessary certification evidence for Your Product including User Manuals, Datasheets, Declarations of Conformance (DoC), etc. and we package everything into a complete certification specification.
We prepare all the tests required by your market specific standards including tests for Electromagnetic Compatibility EMC, Wireless, RF module tests, CE Mark, FCC, EMC Directive 2014/30/EU, Radio Equipment Directive 2014/53/EU (RED), Low Voltage Directive 2014/35/EU and Safety standards.
Third-Party Costs
The completion of the complete certification specification enables us to provide a cost estimate for all certification activities.
Our experience means that costs are considered in the production of the certification specification to provide a value for money solution. In particular, for third-party costs incurred through the use of certification houses.
We take into consideration if your product should be certified for any particular markets such as Europe or any other Markets.
Total Package Calculations
With all third-party cost obtained, we can calculate the total package costs for your product: technology + costs + time estimation.
At the completion of the estimation process, we deliver to you a detailed quotation with fully transparent costs estimations.
Your Approval
Our aim is to get your full agreement, support, and understanding of the estimate. We are happy to discuss the estimated effort and the estimated costs of our quotation with you before seeking your approval.
We always endeavor to find a common working basis. Your opinion is always important to us and guides our business strategy. we want to develop an honest working relationship with our customers based upon trust, we need to make a reasonable profit on the projects we undertake to stay in business but we don’t want you to feel we are aver abusing our relationship.
Confidentiality Guaranteed
We guarantee the confidentiality of your product data at all times during the project lifecycle and after it has completed.
Together is Better
We look forward to working with you to successfully deliver your product according to our motto:
- Coming Together is a beginning
- Keeping together is Progress
- Working together is Success
Clever Circuits Certificate Support
We can take care of obtaining certification for Bluetooth and Bluetooth low energy end products, WLAN / Wi-Fi Device, GSM, UMTS & LTE devices, CAN, LIN, and Automotive Ethernet, and many more
We can fully certificate your Bluetooth and Bluetooth low energy end products
When your product incorporates the wireless MCU along with external circuitry such as an antenna, various matching components, ground plane…
Then you will need to get it certified for use in the market of your choice.
Radio Testing (R & TTE / RED / FCC / ISED) according to the applicable country-specific or harmonized Radio Standards (EN 300 328, FCC 15.247, RSS-210) to ensure electromagnetic compatibility.
Test you Firmware has the correct Bluetooth Stack configuration to achieve Direct Test Mode (DTM) and / or Production Test Mode (PTM).
Test the Host Controller Interface (HCI) for the correct communications between the host and controller elements of the Bluetooth protocol stack
Separately Test the continuous transmitter (TX) & receiver (RX) modes
Test the TX and RX using different RF stimulus including data-high rates (DH) packets like DH1 / DH3 / DH5
Test different channels/frequencies for TX/RX compliance (2402, 2440 (LE), 2441, 2480 MHz)
Test different output powers within the specified minimum and maximum power range for the applicable device type
Test the adaptivity mode for compliance with the EN 300 328 harmonization scheme
Test the emitted radiation levels using the original or a typical antenna
Build a reliable SMA antenna connection to the Device
Conduct EMC tests in accordance with EN 301 489-1/-17
Assess the compliance of the product against the basic restrictions related to human exposure to electromagnetic fields in accordance with EN 62479
Undertake safety tests in accordance with EN 60950
Undertake Bluetooth RF-PHY testing (low energy)
Undertake Bluetooth interoperability (IOP) testing & listing
We can fully certify your WLAN / Wi-Fi interface
Test against the applicable Radio Standards including: EN 300 328, FCC 15.247 [2.4 GHz] and EN 301 893, FCC 15.407 [5 GHz]
Test for correct operation of different WLAN modes (e.g., IEEE 802.11 b / g / n / a /ac)
Test at different data rates in accordance with the IEEE 802.11 Wi-Fi protocol summary (e.g. 2 Mbps / 11 Mbps / 54 Mbps / 450 Mbps / 866.7 Mbps / 1.73 Gbps)
Test different channel frequencies (2412 MHz / 2462 MHz / etc.)
Test different channel bandwidths (20 MHz / 40 MHz / 80 MHz / 160 MHz)
Test the output power within the minimum to maximum power range of the device
Test the continuous transmitter (TX) and receiver (RX) modes
Test the different duty cycles (<99% for FCC)
Test the adaptivity mode for compliance with the EN 300 328 harmonization scheme
Test the emitted radiation level using the original or a typical antenna
Build a reliable SMA antenna connection to the Device
We can fully certify your GSM, UMTS & LTE devices
Test against applicable Radio Standards including EN 301 511 for GSM; EN 301 908 for UMTS & LTE
Test against the FCC part 22/24 standard
Test mobile phone SIM locks
Test mobile terminated packet-switched call from the base
Test the AT control commands
Establish a mobile originated packet-switched call
Test the emitted radiation levels with the original or a typical antenna
Build a reliable SMA antenna connection to the Device
Test for spurious emissions for GSM, UMTS, 2G/3G/4G
Test EMC against the EN 301 489 -1/-52 standard
Test for safety in accordance with EN 62368
Undertake RF exposure evaluation in accordance with EN 6231
We can conduct your proof of conformance testing for CAN, LIN, and Automotive Ethernet
CAN High-Speed and CAN-FD Conformance Tests
Perform the test cases as defined in ISO 11898-2:2016 and ISO 16845-2
Perform CAN-FD tests in accordance with the new international standards ISO 16845-1 and ISO 16845-2
LIN (Local Interconnect Network)
Undertake Physical Layer Tests for LIN 2.1 as Master & Slave Node
Undertake Data Link Layer Tests / NCNM for LIN 2.1 as Master & Slave Node
Automotive Ethernet (BroadR-Reach)
Undertake tests in accordance with the OPEN Alliance BroadR-Reach® (OABR) physical layer standard (IEEE 100 BASE-T1)
Undertake PHY features set-tests (signal quality + cable diagnosis tests) for OABR
Undertake Wake-up/sleep tests for OABR
Undertake Layer 2 tests: IEEE Ethernet MAC + VLAN (802.1Q) + Address Resolution Protocol (ARP)
Undertake Layer 3 tests: Internet Provider Security (IPS) + Internet Control Message Protocol (ICMP)
Undertake Layer 4 tests: User Datagram Protocol (UDP) + Transmission Control Protocol (TCP) + Dynamic Host Configuration Protocol (DHCP)
Undertake Layer 5, 6 and 7 tests: Scalable Service-Oriented Middleware over Internet Protocol (SOME/IP) + Software Distributor (SD)
Perform Link status and link-up tests (for links between advanced driver assistance systems, infotainment, cameras, and other electronic control units)
Request a Call Back?
We are ready to provide you with more information if needed, to answer any question you may have or to help you create an effective solution for your product requirements
Make an Appointment
FOR ANY ENQUIRY
